Your headphones might work fine on your computer, but not with your iPhone. There are a few reasons why this could be happening and what you can do to fix the problem.
Headphones are a crucial part of our day-to-day life, but sometimes they can be frustratingly incompatible with your iPhone. If you’ve been having trouble connecting your JBL headphones to the latest version of iOS, there may be an easy fix for this problem.
The “why won’t my jbl headphones connect to bluetooth” is a question that has been asked many times. There are some solutions for this issue, but the best solution is to make sure that your iPhone and JBL Headphones are on the same network.
I’ve synced my JBL headphones (great) with my iPhone dozens, if not hundreds, of times on the road.
I couldn’t get my JBLs to connect to my iPhone the other day for no apparent reason.
Faced with the thought of a day without music, I went online to learn how to link my JBL headphones to my iPhone.
What’s the Deal With My JBL Headphones Not Connecting to My iPhone?
The most frequent reason your JBL headphones won’t connect to your iPhone is because they weren’t properly detached from the previous device with which they were linked. Hardware difficulties (low/dead battery) and software issues are other possible causes (update required).
There are many reasons why your JBL headphones are unable to connect to your iPhone.
- It’s possible that the Bluetooth capability on your iPhone has been deactivated.
- It’s possible that the headphones’ batteries have run out.
- It’s possible that your headphones are already linked to another device.
- It’s possible that your iPhone has two Bluetooth profiles for your headphones.
- It’s possible that your iPhone is running an old version of iOS.
- The last device with which your JBL headphones were associated was not properly disconnected.
Continue reading to learn how to determine why your JBL headphones are unable to connect to your iPhone and, more importantly, how to resolve the issue.
JBL Headphone and iPhone Connections Troubleshooting
First, double-check that your JBL headphones are working.
If they can’t turn on on their own, there might be a hardware problem.
Due to the wear and tear of continuous usage, older headphones are more likely to have suffered damage over time.
It’s not a bad idea to connect the headphones into the charger and check if getting them fully charged improves their performance.
Unfortunately, the internal battery of the headphones will ultimately fail to retain a charge over a lengthy period of time or a large number of recharge cycles.
Kudos to you if you were able to open the headphones and discover a new battery.
This signifies that the headphones have reached the end of their useful life for the rest of us.
It’s time to get some new earbuds.
If your JBL headphones seem to be in good working condition, it’s time to investigate what’s wrong with your Bluetooth connection further.
JBL headphones can only connect to one Bluetooth device at a time.
This means that if you wish to pair them with another device, such as your laptop or desktop computer, you’ll have to reset the headphones and disconnect the Bluetooth connection profile from the current device.
How to Reset Your JBL Headphones
- Check to see whether the headphones are charged and turned on. If your JBL headphones don’t have a button, move the power switch to the on position.
- Find the volume up and volume down buttons.
- For 10 seconds, hold both buttons down.
- To indicate that your headphones have been reset, they should switch off and produce a ‘ping’ sound.
Remove the Bluetooth profile settings from the device with which you linked the headphones.
The previous profile will no longer operate, and the headphones will have to be linked as a new device.
Double-check that your headphones are in pairing mode.
It’s probable that your headphones aren’t in pairing mode if you can’t see their name in the Bluetooth available connections list.
Locate the Bluetooth button on the right ear cup to manually push the headphones into pairing mode.
Hold this button down for three seconds.
The headphones should be in pairing mode at this point.
If your headphones are still not showing up in the list of accessible devices, you may need to reset them and delete any Bluetooth settings profiles for them on your smartphone.
How to Get Rid of Bluetooth Profiles
It seems to be more difficult than it is.
When you link a Bluetooth device with your smartphone or computer, the smartphone or computer develops a unique information profile for the connection parameters sent by the device.
When you manually link a Bluetooth device from the Bluetooth settings menu, you’ll see this profile, which is established automatically.
Navigate to the Bluetooth settings menu to delete a profile.
You may access the Control Center, the Settings icon in the app tray, or ask Siri to take you there.
I strongly advise you to use the Control Center.
To access the Control Center menu, just slide up from the bottom of the screen.
Then, while holding down the Bluetooth symbol, tap and hold it.
On the screen, the Bluetooth settings menu should appear.
In your associated devices list, look for the device’s name. After that, tap it.
To delete the device, tap the choices. When it asks whether you’re sure, say yes.
You may now re-pair your headphones with your iPhone or a different device.
Typical JBL Headphone and iPhone Problems
I’ll go through some of the problems you could have if your JBL headphones aren’t correctly linked or are defective.
Each problem will be followed by a brief solution or suggestion.
This is not a thorough JBL headphones repair guide, but rather a few pointers to help you prevent some frequent issues.
In the Bluetooth settings, JBL headphones do not display in the list of accessible devices.
The most typical reason why your headphones don’t show up in the Bluetooth devices list is because they aren’t in pairing mode.
Verify that the headphones are turned on.
Then, on the right ear cup, press and hold the Bluetooth button for three seconds to enter pairing mode.
If the headphones seem to be attached to a device that isn’t your iPhone, they might be paired to another Bluetooth-enabled device.
Remove the connection and reset your JBL headphones if you use the headphones with another Bluetooth device in your house.
Try a factory reset on your headphones if they aren’t connecting with anything and aren’t showing up in the Bluetooth settings available devices list.
You may accomplish this by turning on the headphones and holding the volume up and down keys for 10 seconds.
In pairing mode, your headphones should turn off and on.
If none of these work, the Bluetooth transmitter in your JBL headphones may be broken.
This will need contacting the manufacturer for assistance or, if feasible, replacing the headphones.
The sound is coming in and out.
A poor connection, a bad audio source, or a mistake in audio compression may all cause audio problems.
Your Bluetooth connection is most likely incorrect if the music is largely smooth and clear with a few hiccups.
It’s an audio compression issue if all of the sound coming from the headphones is strange.
Audio sources from the internet are sometimes the cause of the problem.
Make sure no other devices are trying to connect to your headphones in order to fix a problematic connection.
JBL’s Bluetooth headphones can only be used with one device at a time.
Another device may be trying to connect to your headphones, causing your intended device to disconnect.
You may be too far away from your device if you experience audio breakdown.
Bluetooth signals are only supposed to function within a thirty-foot range (about 10 meters).
If all of the audio coming from your headphones is distorted, it’s either because the device’s audio compression is failing or because a speaker has blown out.
The sort of sound produced by the speakers will reveal this.
A blown speaker will become silent and sometimes emit crackles and pops.
Digital sounding distortions are common as a consequence of audio compression difficulties.
It is possible to improve audio compression. It’s time to replace a blown speaker.
Reset your JBL headphones to factory settings and delete the Bluetooth settings from your iPhone to repair audio compression difficulties.
The JBL headphones are fully linked and functional, however there is no sound coming from them.
Make sure your audio output is set to your headphones if you can connect your headphones to your iPhone but no audio is playing.
If you possess Apple goods such as the HomePod, Beats, AirPods, iMac, MacBook, and others, you’ll most certainly have various audio outputs around your house.
With so many choices, it’s easy to forget that your iPhone needs to know which speaker to play sound from.
The options for which audio output may be found in your iPhone’s settings.
Disconnecting the Bluetooth connection from any other audio device is the easiest option.
If no other device is prioritized, your iPhone will use your JBL headphones as the default audio output.
There aren’t many individuals who will be confronted with these issues.
If they do, it’ll very certainly be because JBL has to be reset and deleted from prior devices before pairing with a new one.
Reset your gadgets if you’re unsure.
It may sound absurd, but with today’s technology, the hardware is less likely to be the source of the problem than the software.
It’s akin to kicking a speaker to make a shaky audio connection go away.
It’s banal and seems to be stupid, yet it works most of the time.
Most Commonly Asked Questions
What should I do if the device to which my JBL Headphones were previously attached is no longer available?
Don’t panic; if the device will never try to connect to your headphones again, you won’t need to erase the Bluetooth settings profile.
The purpose of removing the Bluetooth settings profile is to ensure that your headphones remain connected to the appropriate device and that signal disruptions are avoided.
If you don’t have access to the previous device, just restarting your JBL headphones should suffice.
I purchased a new iPhone and transferred all of my information to it. Do my JBL Headphones still need to be reset?
Yes. It may seem cumbersome, but your new phone’s Bluetooth profile settings may need specialization.
Some of the features of your JBL headphone may not operate if it is not correctly linked.
The “why won’t my bluetooth headphones connect to my phone” is a question that has been asked by many people. The problem stems from the fact that Apple has not made it possible for all Bluetooth devices to work with their products.
Frequently Asked Questions
What do I do if my JBL headphones wont connect?
A: Make sure the JBL headphones are plugged into your device correctly, then you should be able to use them. If they still dont work after that, contact the company in charge of making the headphones for any troubleshooting tips.
How do I connect my JBL wireless headphones to my iPhone?
A: If you have a JBL wireless headphones, they will be able to connect wirelessly via Bluetooth.
Why wont my headphones connect to my iPhone?
A: Unfortunately, theres a problem with your headphones. We recommend you try changing to them on another device or trying an alternate pair of headphones from the headphone jack in order to test if they are broken or not. If they still dont work after those things have been done, please contact support for further assistance!
- iphone 12 bluetooth not discovering devices
- why can’t i pair my iphone with my ipad
- pairing unsuccessful iphone to iphone
- why won’t my bluetooth connect to my car anymore
- iphone can’t find bluetooth device